2 Messages

2.1 Applicable Messages

The following table is a full list of all ODF messages and describes the list of messages used in Rhythmic Gymnastics .

The column “Message type“ indicates the DocumentType that identifies a message
The column “Message name“ is the message name identified by the message type
The column “Message extended“ indicates whether a particular message has extended definition in regards to those that are general for all sports. If one particular message is not extended, then it should follow the general definition rules.

Message Type	Message Name	Message extended
DT_SCHEDULE / DT_SCHEDULE_UPDATE	Competition schedule / Competition schedule update
DT_PARTIC / DT_PARTIC_UPDATE	List of participants by discipline / List of participants by discipline update	X
DT_PARTIC_TEAMS / DT_PARTIC_TEAMS_UPDATE	List of teams / List of teams update
DT_MEDALS	Medal standings
DT_MEDALLISTS_DAY	Medallists of the day
DT_GLOBAL_GM	Global good morning
DT_GLOBAL_GN	Global good night
DT_RESULT	Event Unit Start List and Results	X
DT_CURRENT	Current Information	X
DT_CUMULATIVE_RESULT	Cumulative Results	X
DT_RANKING	Event Final Ranking	X
DT_COMMUNICATION	Official Communication
DT_CONFIG	Configuration	X
DT_MEDALLISTS	Event's Medallists
DT_MEDALLISTS_DISCIPLINE	Medallists by discipline
DT_LOCAL_OFF	Discipline/venue stop transmission
DT_LOCAL_ON	Discipline/venue start transmission
DT_KA	Keep Alive

2.2 Messages

2.2.1 List of participants by discipline / List of participants by discipline update

2.2.1.1 Description

A participant is considered to be any individual (type athlete, participating or not in the current games) or any official in one or several disciplines or a competitor being part of a team (team member).

Although the participant may participate in more than one event or more than one discipline, this message just contains the information for the discipline of the message, listing the information of all the events for that discipline.

This message includes historical athletes that do not participate in the current competition. Historical athletes will not be registered to any event.

It is important to note that all the sport messages that make references to athletes (start list, event unit results, etc.) will always match the athlete ID with the athlete ID in this message.

List of participants by discipline (DT_PARTIC) is a bulk message, provided for each discipline. It is a complete participant information message for one particular discipline. The arrival of this message resets all the previous participants' information for one particular discipline. This message can include a list of current athletes, officials, coaches, guides, technical officials, Reserves and historical athletes.

List of participants by discipline update (DT_PARTIC_UPDATE) is an update message. It is not a complete list of participants' information by discipline message, only the participant data being modified, i.e. if some data of one participant changes, the element Participant for it with all its children and attributes must be sent.

The key of the information updated consists of the following attribute: Participant @Code. Therefore, any new or updated Participant Discipline-Event will be identified by all these attributes.

2.2.1.2 Header Values

The following table describes the message header attributes.

Attribute	Value	Comment
CompetitionCode	CC @Competition	Unique ID for competition
DocumentCode	DD0000000	DD is defined according to CC @Discipline
DocumentType	DT_PARTIC / DT_PARTIC_UPDATE	List of participants by discipline message
Version	1..V	Version number associated to the message's content. Ascendant number
FeedFlag	"P"-Production "T"-Test	Test message or production message.
Date	Date	Date when the message is generated, expressed in the local time zone where the message was produced.
Time	Time	Time up to milliseconds when the message is generated, expressed in the local time zone where the message was produced.
LogicalDate	Date	Logical Date of events. This is the same as the physical day except when the unit or message transmission extends after midnight. If an event unit continues after midnight (24:00), all messages produced will be considered as happening at the logical date on which the event unit began (e.g. for a session which began at 21:00 on Aug 2 and ended at 1:20 on Aug 3, the message will all be dated Aug 2). The end of the logical day is defined by default at 03:00 a.m. For messages corrections, like invalidating medals or Records, it will be the LogicalDate of the day of the correction. Logical Date is expressed in the local time zone where the message was produced.
Source	SC @Source	Code indicating the system which generated the message.
Serial	Numeric	Sequence number (positive integer) for ODF messages. Serial starts with 1 each day for each Source.

2.2.1.3 Trigger and Frequency

The DT_PARTIC message is sent as a bulk message approximately one month before the Games. It is sent several times up to the date of transfer of control to OVR after which only DT_PARTIC_UPDATE messages are sent.

The DT_PARTIC_UPDATE message is triggered when there is a modification in the data for any individual after the transfer of control to OVR.

2.2.1.4 Message Structure

The following table defines the structure of the message.

Level 1	Level 2	Level 3	Level 4	Level 5
Competition (1,1)
	Code
	Participant (1,N)
		Code
		Parent
		Status
		GivenName
		FamilyName
		PrintName
		PrintInitialName
		TVName
		TVInitialName
		LocalFamilyName
		LocalGivenName
		Gender
		Organisation
		BirthDate
		Height
		Weight
		PlaceofBirth
		CountryofBirth
		PlaceofResidence
		CountryofResidence
		Nationality
		MainFunctionId
		Current
		OlympicSolidarity
		ModificationIndicator
		Discipline (1,1)
			Code
			IFId
			RegisteredEvent (0,N)
				Gender
				Event
				Bib
		OfficialFunction (0,N)
			FunctionId

2.2.1.5 Message Values

Element: Competition (1,1)

Attribute

M/O

Value

Description

Code

CC @Competition

Unique ID for competition

Code is deprecated and value is duplicated in the header.

Element: Participant (1,N)

Attribute	M/O	Value	Description
Code	M	S(20) with no leading zeroes	Participant's ID. It identifies an athlete or an official and the holding participant's valid information for one particular period of time. It is used to link other messages to the participant's information. Participant's information (example @Organisation) will not be the latest for the athlete/official, unless the @Code attribute is the same as the @Parent attribute. However, this information could be the one being valid in the particular moment of a start list, event unit results, etc. When the participant is an historical one, then this ID will start with "A" when it is an Athlete, "C" when Coach and "O" when Official.
Parent	M	S(20) with no leading zeroes	Participant's parent ID, which is used to link to the latest valid information for one participant. @Parent attribute should be linked to the latest participant's information, by retrieving that Athlete/Official whose @Code attribute is the same as @Parent. The participant containing @Code attribute being the same as the @Parent attribute will be the one with the latest information for the participant. The @Parent attribute will only be different from @Code in the case that critial personal information has changed from previous competitions. The typical examples are Organisation (for change of country) or Name (particularly for women changing their name at marriage). Further to be clear, @Parent and @Code can only be different if Current = "false".
Status	O	CC @ParticStatus	Participant's accreditation status this atribute is Mandatory in the case of @Current="true" and it is optional in the case that @Current="false". To delete a participant, a specific value of the Status attribute is used.
GivenName	O	S(25)	Given name in WNPA format (mixed case)
FamilyName	M	S(25)	Family name in WNPA format (mixed case)
PrintName	M	S(35)	Print name (family name in upper case + given name in mixed case)
PrintInitialName	M	S(18)	Print Initial name (for the given name it is sent just the initial, without dot)
TVName	M	S(35)	TV name
TVInitialName	M	S(18)	TV initial name
LocalFamilyName	O	S(25)	Family name in the local language in the appropriate case for the local language (usually mixed case) Not for use in Rio 2016
LocalGivenName	O	S(25)	Given name in the local language in the appropriate case for the local language (usually mixed case). Not for use in Rio 2016
Gender	M	CC @PersonGender	Participant's gender
Organisation	M	CC @Organisation	Organisation ID
BirthDate	O	YYYY-MM-DD	Date of birth. This information may not be known at the very beginning, but it will be completed for all participants after successive updates
Height	O	S(3)	Height in centimetres. It will be included if this information is available. This information is not needed in the case of officials/referees. "-" may be used where the data is not available.
Weight	O	S(3)	Weight in kilograms. It will be included if this information is available. This information is not needed in the case of officials/referees. "-" may be used where the data is not available.
PlaceofBirth	O	S(75)	Place of Birth
CountryofBirth	O	CC @Country	Country ID of Birth
PlaceofResidence	O	S(75)	Place of Residence
CountryofResidence	O	CC @Country	Country ID of Residence
Nationality	O	CC @Country	Participant's nationality. Although this attribute is optional, in very exceptional situations it will not be known, and for this reason not ready to be sent.
MainFunctionId	M	CC @ResultsFunction	Main function
Current	M	boolean	It defines if a participant is participating in the games (true) or is a Historical participant (false).
OlympicSolidarity	O	S(1)	'Y' or 'N' Flag to indicating if the participant participates in the Olympic Scholarship program.
ModificationIndicator	M	S(1)	'N' or 'U' Attribute is mandatory in the DT_PARTIC_UPDATE message only N-New participant (in the case that this information comes as a late entry) U-Update participant If ModificationIndicator='N', then include new participant to the previous bulk-loaded list of participants If ModificationIndicator='U', then update the participant to the previous bulk-loaded list of participants To delete a participant, a specific value of the Status attribute is used.

Element: Participant /Discipline (1,1)

All participating athletes will be assigned at least one discipline, it could be more. Each accredited official will be assigned at least one discipline, but it could be more. If an athlete or official is assigned to more than one discipline, it will be included in the participant message of both disciplines.

Attribute

M/O

Value

Description

Code

CC @Discipline

It is the discipline code used to fill the OdfBody @DocumentCode attribute.

IFId

S(16)

FIG Licence Number. It will be included if this information is available.

For the athletes and the officials.

Element: Participant /Discipline /RegisteredEvent (0,N)

All accredited athletes will be assigned to one or more events. There is one exception: in some sports, substitutes may be accredited without any associated event. Historical athletes are not registered to any event.

Attribute	M/O	Value	Description
Gender	M	CC @DisciplineGender	Discipline Gender Code
Event	M	CC @Event	Event ID
Bib	O	S(4)	Athlete's competitor number, to be sent mandatory once it is known. Only for Individual events, not for Group members.

Element: Participant /OfficialFunction (0,N)

Send if the official has optional functions. Do not send, otherwise.

Attribute	M/O	Value	Description
FunctionId	M	CC @ResultsFunction	Additional officials' function code

2.2.1.6 Message Sort

The message is sorted by Participant @Code

2.2.2 Event Unit Start List and Results

2.2.2.1 Description

The Event Unit Start List and Results is a message containing both the start list and results information of the competitors in one (individual or team) event unit.

The Event Unit Start List and Results is a mandatory message for all sports. The definition includes as much generic information as possible due to the fact that each discipline and event has its own format for the results information (example: score of a match, time in a race, distance in a throw...).

This is always a full message and all applicable elements and attributes are always sent.

2.2.2.2 Header Values

The following table describes the message header attributes.

Attribute	Value	Comment
CompetitionCode	CC @Competition	Unique ID for competition
DocumentCode	DDGEEEPUU	DD according to CC @Discipline G according to CC @DisciplineGender EEE according to CC @Event P according to CC @Phase UU according to CC @Unit
DocumentType	DT_RESULT	Event Unit Start List and Results message
DocumentSubtype	Not used in GR	Not used in GR
Version	1..V	Version number associated to the message's content. Ascendant number
ResultStatus	SC @ResultStatus	It indicates whether the result is official or unofficial etc. START_LIST LIVE UNOFFICIAL OFFICIAL
FeedFlag	"P"-Production "T"-Test	Test message or production message.
Date	Date	Date when the message is generated, expressed in the local time zone where the message was produced.
Time	Time	Time up to milliseconds when the message is generated, expressed in the local time zone where the message was produced.
LogicalDate	Date	Logical Date of events. This is the same as the physical day except when the unit or message transmission extends after midnight. If an event unit continues after midnight (24:00), all messages produced will be considered as happening at the logical date on which the event unit began (e.g. for a session which began at 21:00 on Aug 2 and ended at 1:20 on Aug 3, the message will all be dated Aug 2). The end of the logical day is defined by default at 03:00 a.m. For messages corrections, like invalidating medals or Records, it will be the LogicalDate of the day of the correction. Logical Date is expressed in the local time zone where the message was produced.
Source	SC @Source	Code indicating the system which generated the message.
StartListMod	S(1)	Send Y if the start list has been changed with this message and the ResultStatus is not START_LIST. Do not send the attribute if it is not Y. Only send once for each start list change. In this case the full current message is sent with whatever is the current ResultStatus. The Start List is considered to be changed if any of the following changes: * Competitors or athletes are added, changed or removed including in <ExtendedInfos /Competitor> * Any change in <Officials> * Any change in StartOrder or StartSortOrder * Any changes in <Coaches> * Any changes in <EventUnitEntry> Changing descriptions is not considered a start list change.
Serial	Numeric	Sequence number (positive integer) for ODF messages. Serial starts with 1 each day for each Source.

2.2.2.3 Trigger and Frequency

This message is sent with ResultStatus:

* "START_LIST": As soon as the competition order is known and any updates

* "LIVE": When the first competitor starts and during the unit with all updates

* "UNOFFICIAL": After the unit has finished

* "OFFICIAL": After the Result is approved

Trigger also after any change.

2.2.2.4 Message Structure

The following table defines the structure of the message.

Level 1	Level 2	Level 3	Level 4	Level 5	Level 6	Level 7	Level 8	Level 9
Competition (1,1)
	Code
	ExtendedInfos (0,1)
		ExtendedInfo (0,N)
			Type
			Code
			Pos
			Value
		SportDescription (0,1)
			DisciplineName
			EventName
			Gender
			SubEventName
		VenueDescription (0,1)
			Venue
			VenueName
			Location
			LocationName
	Officials (0,1)
		Official (1,N)
			Code
			Function
			Order
			Description (1,1)
				GivenName
				FamilyName
				Gender
				Organisation
			ExtOfficial (0,N)
				Type
				Code
				Pos
				Value
	Result (1,N)
		Rank
		Result
		IRM
		SortOrder
		StartOrder
		StartSortOrder
		ResultType
		Competitor (1,1)
			Code
			Type
			Bib
			Organisation
			Description (0,1)
				TeamName
			EventUnitEntry (0,N)
				Type
				Code
				Pos
				Value
			ExtendedResults (0,1)
				ExtendedResult (1,N)
					Type
					Code
					Pos
					Value
					ValueType
					IRM
					Extension (0,N)
						Code
						Pos
						Value
			Composition (0,1)
				Athlete (1,N)
					Code
					Order
					Bib
					Description (1,1)
						GivenName
						FamilyName
						Gender
						Organisation
						BirthDate
						IFId
					EventUnitEntry (0,N)
						Type
						Code
						Pos
						Value
					ExtendedResults (0,1)
						ExtendedResult (1,N)
							Type
							Code
							Pos
							Value
							ValueType
							IRM
							Extension (0,N)
								Code
								Pos
								Value

2.2.2.5 Message Values

Element: Competition (1,1)

Attribute

M/O

Value

Description

Code

CC @Competition

Unique ID for competition

Code is deprecated and value is duplicated in the header.

Element: ExtendedInfos /ExtendedInfo (0,N)

	Type	Code	Pos	Description
UI		SUBDIVISION	N/A	Element Expected: Always if there are subdivisions
	Attribute	M/O	Value	Description
	Value	M	Numeric 0	Send the subdivision
UI		ROTATION	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	Numeric 0	Send the current rotation

Element: ExtendedInfos /SportDescription (0,1)

Sport Descriptions in Text.

Attribute	M/O	Value	Description
DisciplineName	M	S(40)	Discipline name (not code) from Common Codes
EventName	M	S(40)	Event name (not code) from Common Codes
Gender	M	CC @DisciplineGender	Gender code for the event unit
SubEventName	O	S(40)	EventUnit short name (not code) from Common Codes

Element: ExtendedInfos /VenueDescription (0,1)

Venue Names in Text.

Attribute	M/O	Value	Description
Venue	M	CC @VenueCode	Venue Code
VenueName	M	S(25)	Venue short name (not code) from Common Codes
Location	M	CC @Location	Location code
LocationName	M	S(30)	Location short name (not code) from Common Codes

Element: Officials /Official (1,N)

Attribute	M/O	Value	Description
Code	M	S(20) with no leading zeroes	Official's code
Function	M	CC @ResultsFunction	Official's function (example: referee, etc.). Can be different from the function sent in the DT_PARTIC message.
Order	M	Numeric #0	Send order inside each apparatus according to ORIS.

Element: Officials /Official /Description (1,1)

Officials extended information.

Attribute	M/O	Value	Description
GivenName	O	S(25)	Given name in WNPA format (mixed case)
FamilyName	M	S(25)	Family name in WNPA format (mixed case)
Gender	M	CC @PersonGender	Gender of the official
Organisation	M	CC @Organisation	Officials' organisation

Element: Officials /Official /ExtOfficial (0,N)

	Type	Code	Pos	Description
EO		APPARATUS	N/A	Element Expected: When the judge is assigned to an apparatus
	Attribute	M/O	Value	Description
	Value	M	SC @Apparatus	Send proposed code
EO		JURY_TYPE	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	SC @JuryType	Send proposed code

Sample (Official)

...

</Official>

</Official>

...

</Official>

</Official>

...

</Officials>

...

Element: Result (1,N)

For each Event Unit Results message, there must be at least one competitor with a result element in the event unit.

Attribute	M/O	Value	Description
Rank	O	Numeric	Send if all rotations are included inside the single unit else do not send.
Result	O	Numeric ##0.000	Score (total for all rotations included in the unit)
IRM	O	SC @IRM	IRM for the particular event unit Send just in the case @ResultType is IRM
SortOrder	M	Numeric	Used to sort all the results of an event unit Before the start of the competition it is the same as StartSortOrder. After the competition has started it will consider also the rank in the case the unit includes all rotations and the Rank is included in the message.
StartOrder	M	Numeric	Send the start order for the rotation, 1 to n.
StartSortOrder	M	Numeric	Send the order of competitor in the rotation, 1 to n.
ResultType	O	SC @ResultType	Type of the @Result attribute.

Element: Result /Competitor (1,1)

Competitor related to the result of one event unit.

Attribute	M/O	Value	Description
Code	M	S(20) with no leading zeroes	Competitor's ID
Type	M	T, A	T for team A for athlete
Bib	O	S(4)	Bib number
Organisation	O	CC @Organisation	Competitor's organisation

Element: Result /Competitor /Description (0,1)

Competitors extended information.

Attribute	M/O	Value	Description
TeamName	O	S(73)	Name of the team. Only applies for teams / groups.

Element: Result /Competitor /EventUnitEntry (0,N)

For team event information

	Type	Code	Pos	Description
EUE		APPARATUS	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	SC @Apparatus	Send the apparatus for the competitor
EUE		MUSIC_LENGTH	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	m:ss	Send the music length(time) for this apparatus for this competitor
EUE		MUSIC_TITLE	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	String	Send the music title for this apparatus for this competitor
EUE		MUSIC_COMPOSER	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	String	Send the music composer for this apparatus for this competitor

Sample (EventUnitEntry)

...

...

Element: Result /Competitor /ExtendedResults /ExtendedResult (1,N)

	Type	Code	Pos	Description
ER		CC@Apparatus	N/A	Element Expected: When available
	Attribute	M/O	Value	Description
	Value	O	Numeric #0.000	Send the competitor score on the apparatus
	ValueType	M	SC @ResultType	ValueType should be used to describe the type of data @Value
	IRM	O	SC @IRM	Send appropriate IRM code if IRM at this ExtendedResult
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	DIFFICULTY
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the difficulty score for the competitor on this apparatus
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	EXECUTION
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the execution score for the competitor on this apparatus
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: Only in the case of inquiry for the difficulty score
	Attribute	Value	Description
	Code	INQUIRY
	Pos	N/A	N/A
	Value	SC @Inquiry	Send inquiry code
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: If applicable
	Attribute	Value	Description
	Code	PENALTY
	Pos	N/A	N/A
	Value	Numeric -0.000	Send the total Penalty for this apparatus

Sample (Group)

...

</ExtendedResult>

</ExtendedResults>

</Athlete>

</Athlete>

...

</Composition>

</Competitor>

</Result>

...

Element: Result /Competitor /Composition /Athlete (1,N)

Attribute	M/O	Value	Description
Code	M	S(20) with no leading zeroes	Athlete's ID. Can belong to a team member or an individual athlete.
Order	M	Numeric	Order attribute used to sort team members in a team (if Competitor @Type="T") on the results or 1 if Competitor @Type="A".
Bib	O	S(4)	Athlete's competitor number. Only for Individual events, not for Group members.

Element: Result /Competitor /Composition /Athlete /Description (1,1)

Athletes extended information.

Attribute	M/O	Value	Description
GivenName	O	S(25)	Given name in WNPA format (mixed case)
FamilyName	M	S(25)	Family name in WNPA format (mixed case)
Gender	M	CC @PersonGender	Gender of the athlete
Organisation	M	CC @Organisation	Athletes' organisation
BirthDate	O	Date	Birth date (example: YYYY-MM-DD). Must include if the data is available
IFId	O	S(16)	International Federation ID

Element: Result /Competitor /Composition /Athlete /EventUnitEntry (0,N)

Individual athletes entry information.

	Type	Code	Pos	Description
EUE		APPARATUS	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	SC @Apparatus	Send the apparatus for the competitor
EUE		MUSIC_LENGTH	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	m:ss	Send the music length(time) for this apparatus for this competitor
EUE		MUSIC_TITLE	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	String	Send the music title for this apparatus for this competitor
EUE		MUSIC_COMPOSER	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	String	Send the music composer for this apparatus for this competitor
EUE		RESERVE	N/A	Element Expected: When applicable
	Attribute	M/O	Value	Description
	Value	M	Y	Send Y if the athlete is reserve else do not send. Reserves are included in all rotations.

Sample (Individual)

...

...

Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult (1,N)

Team member or individual athlete's extended result.

	Type	Code	Pos	Description
ER		CC@Apparatus	N/A	Element Expected: When available
	Attribute	M/O	Value	Description
	Value	O	Numeric #0.000	Send the competitor score on the apparatus
	ValueType	O	SC @ResultType	ValueType should be used to describe the type of data @Value
	IRM	O	SC @IRM	Send appropriate IRM code if IRM at this ExtendedResult
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	DIFFICULTY
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the difficulty score for the competitor on this apparatus
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	EXECUTION
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the execution score for the competitor on this apparatus
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: Only in the case of inquiry for the difficulty score
	Attribute	Value	Description
	Code	INQUIRY
	Pos	N/A	N/A
	Value	SC @Inquiry	Send inquiry code
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: If applicable
	Attribute	Value	Description
	Code	PENALTY
	Pos	N/A	N/A
	Value	Numeric -0.000	Send the total Penalty for this apparatus

Sample (Individual)

...

</ExtendedResult>

</ExtendedResults>

</Athlete>

</Composition>

</Competitor>

</Result>

...

2.2.2.6 Message Sort

Sort by Result @SortOrder

2.2.3 Current Information

2.2.3.1 Description

The Current message is a message containing the current information in a competition which is live. The message is used to send the latest applicable information.

2.2.3.2 Header Values

The following table describes the message header attributes.

Attribute	Value	Comment
CompetitionCode	CC @Competition	Unique ID for competition
DocumentCode	DDGEEEPUU	DD according to CC @Discipline G according to CC @DisciplineGender EEE according to CC @Event P according to CC @Phase UU according to CC @Unit
DocumentSubcode	Not used in GR	Not used in GR
DocumentType	DT_CURRENT	Current message
Version	1..V	Version number associated to the message's content. Ascendant number
FeedFlag	"P"-Production "T"-Test	Test message or production message.
Date	Date	Date when the message is generated, expressed in the local time zone where the message was produced.
Time	Time	Time up to milliseconds when the message is generated, expressed in the local time zone where the message was produced.
LogicalDate	Date	Logical Date of events. This is the same as the physical day except when the unit or message transmission extends after midnight. If an event unit continues after midnight (24:00), all messages produced will be considered as happening at the logical date on which the event unit began (e.g. for a session which began at 21:00 on Aug 2 and ended at 1:20 on Aug 3, the message will all be dated Aug 2). The end of the logical day is defined by default at 03:00 a.m. For messages corrections, like invalidating medals or Records, it will be the LogicalDate of the day of the correction. Logical Date is expressed in the local time zone where the message was produced.
Source	SC @Source	Code indicating the system which generated the message.
Serial	Numeric	Sequence number (positive integer) for ODF messages. Serial starts with 1 each day for each Source.

2.2.3.3 Trigger and Frequency

* After every competitor completes a routine and the score is available or a new competitor starts a routine.

* If there is no previous competitor on the apparatus in the session then send (with one competitor as next) when the first unit ScheduleStatus becomes GETTING_READY.

Up to a maximum of three competitors are sent in any message. These competitors are the one most recently completed an apparatus in the rotation (@Stage = LAST or WAITING) the current competitor and the competitor next to start.

Each competitor only includes the apparatus in the current rotation.

2.2.3.4 Message Structure

The following table defines the structure of the message.

Level 1	Level 2	Level 3	Level 4	Level 5	Level 6	Level 7	Level 8	Level 9
Competition (1,1)
	Code
	ExtendedInfos (0,1)
		ExtendedInfo (1,N)
			Type
			Code
			Pos
			Value
			Extension (0,N)
				Code
				Pos
				Value
	Result (0,N)
		Rank
		RankEqual
		Result
		IRM
		SortOrder
		StartSortOrder
		ResultType
		Diff
		Competitor (1,N)
			Code
			Type
			Bib
			Organisation
			ExtendedResults (0,1)
				ExtendedResult (1,N)
					Type
					Code
					Pos
					Value
					ValueType
					IRM
					Rank
					RankEqual
					Extension (0,N)
						Code
						Pos
						Value
			Composition (0,1)
				Athlete (1,N)
					Code
					Order
					Bib
					ExtendedResults (0,1)
						ExtendedResult (1,N)
							Type
							Code
							Pos
							Value
							ValueType
							IRM
							Rank
							RankEqual
							Extension (0,N)
								Code
								Pos
								Value

2.2.3.5 Message Values

Element: Competition (1,1)

Attribute

M/O

Value

Description

Code

CC @Competition

Unique ID for competition

Code is deprecated and value is duplicated in the header.

Element: ExtendedInfos /ExtendedInfo (1,N)

	Type	Code	Pos	Description
UI		PHASE	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	String	Send event and phase RSC (eg. GRW024900, GRW024100, GRW340900, GRW340100)
	Sub Element: ExtendedInfos /ExtendedInfo /Extension Expected: Always
	Attribute	Value	Description
	Code	ROTATION
	Pos	N/A	N/A
	Value	Numeric #0	Send the current rotation number
	Sub Element: ExtendedInfos /ExtendedInfo /Extension Expected: When applicable
	Attribute	Value	Description
	Code	SUBDIVISION
	Pos	N/A	N/A
	Value	Numeric #0	Send the current subdivision number

Sample (Individual All-Around Qualification)

...

</ExtendedInfo>

</ExtendedInfos>

...

Element: Result (0,N)

Attribute	M/O	Value	Description
Rank	O	Numeric	Rank of the competitor in the phase. This attribute is optional because the competitor could get an invalid result mark.
RankEqual	O	Y	Identifies if a rank has been equalled. Only send if applicable
Result	O	Numeric #0.000	Score for the competitor in the phase
IRM	O	SC @IRM	IRM for the particular event unit Send just in the case @ResultType is IRM
SortOrder	M	Numeric	This attribute is a sequential number with the start order of the competitors in the unit.
StartSortOrder	M	Numeric	Not used in GR
ResultType	O	SC @ResultType	Type of the @Result attribute.
Diff	O	Numeric #0.000	Points behind leader. Send 0.000 for the leader. This is not the Difficulty score.

Element: Result /Competitor (1,N)

Competitor related to the result of one event unit.

Attribute	M/O	Value	Description
Code	M	S(20) with no leading zeroes	Competitor's ID
Type	M	T, A	T for team A for athlete
Bib	O	S(4)	Bib number
Organisation	M	CC @Organisation	Competitor's organisation

Element: Result /Competitor /ExtendedResults /ExtendedResult (1,N)

	Type	Code	Pos	Description
ER		STAGE	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	SC @Stage	Send applicable code
ER		APPARATUS	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	SC @Apparatus	Send the apparatus for the competitor
ER		ROTATION	N/A	Element Expected: Always if not zero
	Attribute	M/O	Value	Description
	Value	M	Numeric 0	Send the number of rotations which makes up the overall score in the phase. Do not send if 0.
ER		DIFF	Numeric #0	Pos Description: Send the rank number for the applicable points behind. Points behind the second & third ranked competitors and last qualifying place. Pos=2 is points behind second Pos=3 is points behind third Pos=x is points behind last qualified where x=last qualifying rank. (do not send in finals) Element Expected: Always after the competitor has a score. Only send behind last qualifying for the qualification phase and when STAGE=LAST.
	Attribute	M/O	Value	Description
	Value	M	Numeric #0.000	Send the points behind or "-" if higher than the rank. Send 0.000 if in @Pos rank. This is not the Difficulty score.
ER		PREV_SCORE	N/A	Element Expected: For rotations higher than 1, only for Current and Next gymnasts
	Attribute	M/O	Value	Description
	Value	M	Numeric #0.000	Send the competitor total score after the previous rotation
ER		PREV_RANK	N/A	Element Expected: For rotations higher than 1, only for Current and Next gymnasts
	Attribute	M/O	Value	Description
	Value	M	Numeric #0	Send the competitor total rank after the previous rotation
ER		PREV_ERANK	N/A	Element Expected: For rotations higher than 1, only for Current and Next gymnasts
	Attribute	M/O	Value	Description
	Value	M	Y	Send Y if PREV_RANK is equalled, otherwise do not send.
ER		CC@Apparatus	N/A	Element Expected: When available
	Attribute	M/O	Value	Description
	Value	O	Numeric #0.000	Send the competitor score on the apparatus
	ValueType	M	SC @ResultType	ValueType should be used to describe the type of data @Value
	IRM	O	SC @IRM	Send appropriate IRM code if IRM at this ExtendedResult
	Rank	O	Numeric #0	Send the rank of the competitor on the apparatus.
	RankEqual	O	Y	Send Y where Rank at this specific ExtendResult is equalled else not sent.
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	DIFFICULTY
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the difficulty score for the competitor on this apparatus
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	EXECUTION
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the execution score for the competitor on this apparatus
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: Only in the case of inquiry for the difficulty score
	Attribute	Value	Description
	Code	INQUIRY
	Pos	N/A	N/A
	Value	SC @Inquiry	Send inquiry code
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: If applicable
	Attribute	Value	Description
	Code	PENALTY
	Pos	N/A	N/A
	Value	Numeric -0.000	Send the total Penalty for this apparatus

Sample (Group)

...

</ExtendedResult>

</ExtendedResults>

</Athlete>

</Athlete>

...

</Composition>

</Competitor>

</Result>

...

Element: Result /Competitor /Composition /Athlete (1,N)

Attribute	M/O	Value	Description
Code	M	S(20) with no leading zeroes	Athletes ID. Can belong to a team member or an individual athlete.
Order	M	Numeric	1 if Competitor @Type="A".
Bib	O	S(4)	Bib number

Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult (1,N)

Team member or individual athlete's extended result.

	Type	Code	Pos	Description
er		STAGE	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	SC @Stage	Send applicable code
ER		APPARATUS	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	SC @Apparatus	Send the apparatus for the competitor
ER		ROTATION	N/A	Element Expected: Always if not zero
	Attribute	M/O	Value	Description
	Value	M	Numeric 0	Send the number of rotations which makes up the overall score in the phase. Do not send if 0.
ER		DIFF	Numeric #0	Pos Description: Send the rank number for the applicable points behind. Points behind the second & third ranked competitors and last qualifying place. Pos=2 is points behind second Pos=3 is points behind third Pos=x is points behind last qualified where x=last qualifying rank. (do not send in finals) Element Expected: Always after the competitor has a score. Only send behind last qualifying for the qualification phase and when STAGE=LAST
	Attribute	M/O	Value	Description
	Value	M	S(1) or Numeric #0.000	Send the points behind or "-" if higher than the rank. Send 0.000 if in @Pos rank This is not the Difficulty score.
ER		PREV_SCORE	N/A	Element Expected: For rotations higher than 1, only for Current and Next gymnasts
	Attribute	M/O	Value	Description
	Value	M	Numeric #0.000	Send the competitor total score after the previous rotation
ER		PREV_RANK	N/A	Element Expected: For rotations higher than 1, only for Current and Next gymnasts
	Attribute	M/O	Value	Description
	Value	O	Numeric #0	Send the competitor total rank after the previous rotation
ER		PREV_ERANK	N/A	Element Expected: For rotations higher than 1, only for Current and Next gymnasts
	Attribute	M/O	Value	Description
	Value	M	Y	Send Y if PREV_RANK is equalled, otherwise do not send.
ER		CC@Apparatus	N/A	Element Expected: When available
	Attribute	M/O	Value	Description
	Value	O	Numeric #0.000	Send the competitor score on the apparatus
	ValueType	O	SC @ResultType	ValueType should be used to describe the type of data @Value
	IRM	O	SC @IRM	Send appropriate IRM code if IRM at this ExtendedResult
	Rank	O	Numeric #0	Send the rank of the competitor on the apparatus.
	RankEqual	O	Y	Send Y where Rank at this specific ExtendResult is equalled else not sent.
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	DIFFICULTY
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the difficulty score for the competitor on this apparatus
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	EXECUTION
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the execution score for the competitor on this apparatus
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: Only in the case of inquiry for the difficulty score
	Attribute	Value	Description
	Code	INQUIRY
	Pos	N/A	N/A
	Value	SC @Inquiry	Send inquiry code
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: If applicable
	Attribute	Value	Description
	Code	PENALTY
	Pos	N/A	N/A
	Value	Numeric -0.000	Send the total Penalty for this apparatus

Sample (Individual)

...

</ExtendedResult>

</ExtendedResults>

</Athlete>

</Composition>

</Competitor>

</Result>

...

2.2.3.6 Message Sort

Sort by Result @SortOrder.

2.2.4 Cumulative Results

2.2.4.1 Description

The Cumulative Results is a message containing the cumulative results for the competitors in a group of units either in a single phase or over a number of phases. This message is used when the competitor scores accumulate over the different units.

The difference between the Phase Results message (DT_PHASE_RESULTS) and the Cumulative Results (DT_CUMULATIVE_RESULT) is that the first one includes only the results for the phase independently from previous phases, while the Cumulative Results is for competitions where scores of the competitors are accumulated over a number of units and/or phases.

The Cumulative Results message is be used to send an intermediate summary of results (including rank) part way through a phase. In this case, the DocumentSubtype is used to specify the last event unit that contributed results to the message.

Following behavior is for competitions with subdivisions (non-Olympic events):

As soon as a competitor is included in the message, all apparatuses the competitor may compete on should be listed. Apparatuses where the competitor has not competed yet should be exported with ValueType SC@ResultType:NO_SCORE. Once a result is obtained on the apparatus, the ValueType, Value, Rank, etc. should be updated accordingly. It is essential to understand that competitors who have not performed on any apparatus yet will NOT be listed in the message. Thus, all competitors in the message will always have at least one ExtendedResult Code=CC@Apparatus with ValueType different from SC@ResultType:NO_SCORE.

Competitors are included in Cumulative Result messages only as soon as they have obtained a result in the current subdivision.

Upon rotation change, two different cases are highlighted:

- Competitors who, by choice or otherwise, have not obtained a result - valid or invalid - in the previous rotation (before rotation change), and therefore cannot be ranked in the All-Around at all in the future, will be entirely removed from the message.

- Competitors who have completed all apparatuses so far, except for the result to be obtained in the new rotation, are included - without rank - at the end of the message. As the new rotation progresses, the competitors obtaining results are progressively reinstated in the ranked results.

Competitors who, on the other hand, do not obtain a result in the new rotation will, at the end of the rotation, fall into the first case and be removed from the message.

At the end of the subdivision, because competitors will not be given any new chance of obtaining sufficient results to be included in the All-Around ranking, competitors falling in either cases are entirely removed from the message, not to return. This change should arise as soon as possible, but at the very least as soon as the subdivision result status is UNOFFICIAL.

2.2.4.2 Header Values

The following table describes the message header attributes.

Attribute	Value	Comment
CompetitionCode	CC @Competition	Unique ID for competition
DocumentCode	DDGEEEP00	DD according to CC @Discipline G according to CC @DisciplineGender EEE according to CC @Event P according to CC @Phase
DocumentType	DT_CUMULATIVE_RESULT	Cumulative Results message
DocumentSubtype	CC @Unit	It is the DocumentCode code up to the moment the cumulative message contains information: DDGEEEPUU: that would represent the cumulative results up to (and including) the referenced rotation
Version	1..V	Version number associated to the message's content. Ascendant number
ResultStatus	SC @ResultStatus	It indicates the status of the results LIVE INTERMEDIATE (after every rotation except the last) UNOFFICIAL OFFICIAL
FeedFlag	"P"-Production "T"-Test	Test message or production message.
Date	Date	Date when the message is generated, expressed in the local time zone where the message was produced.
Time	Time	Time up to milliseconds when the message is generated, expressed in the local time zone where the message was produced.
LogicalDate	Date	Logical Date of events. This is the same as the physical day except when the unit or message transmission extends after midnight. If an event unit continues after midnight (24:00), all messages produced will be considered as happening at the logical date on which the event unit began (e.g. for a session which began at 21:00 on Aug 2 and ended at 1:20 on Aug 3, the message will all be dated Aug 2). The end of the logical day is defined by default at 03:00 a.m. For messages corrections, like invalidating medals or Records, it will be the LogicalDate of the day of the correction. Logical Date is expressed in the local time zone where the message was produced.
Source	SC @Source	Code indicating the system which generated the message.
Serial	Numeric	Sequence number (positive integer) for ODF messages. Serial starts with 1 each day for each Source.

2.2.4.3 Trigger and Frequency

Send:

* after every athlete completes a routine as LIVE;

* after every rotation except the last as INTERMEDIATE;

* at the end of each rotation (except last rotation) send for next rotations as INTERMEDIATE;

* when all units are complete as UNOFFICIAL / OFFICIAL when applicable.

2.2.4.4 Message Structure

The following table defines the structure of the message.

Level 1	Level 2	Level 3	Level 4	Level 5	Level 6	Level 7	Level 8	Level 9
Competition (1,1)
	Code
	ExtendedInfos (0,1)
		ExtendedInfo (0,N)
			Type
			Code
			Pos
			Value
		SportDescription (0,1)
			DisciplineName
			EventName
			SubEventName
			Gender
		VenueDescription (0,1)
			Venue
			VenueName
			Location
			LocationName
	Result (1,N)
		Rank
		RankEqual
		ResultType
		Result
		IRM
		QualificationMark
		SortOrder
		Competitor (1,1)
			Code
			Type
			Bib
			Organisation
			Description (0,1)
				TeamName
			ExtendedResults (0,1)
				ExtendedResult (1,N)
					Type
					Code
					Pos
					Value
					ValueType
					IRM
					Rank
					RankEqual
					SortOrder
					Extension (0,N)
						Code
						Pos
						Value
			Composition (1,1)
				Athlete (1,N)
					Code
					Order
					Bib
					Description (1,1)
						GivenName
						FamilyName
						Gender
						Organisation
						BirthDate
						IFId
					ExtendedResults (0,1)
						ExtendedResult (1,N)
							Type
							Code
							Pos
							Value
							ValueType
							IRM
							Rank
							RankEqual
							SortOrder
							Extension (0,N)
								Code
								Pos
								Value

2.2.4.5 Message Values

Element: Competition (1,1)

Attribute

M/O

Value

Description

Code

CC @Competition

Unique ID for competition

Code is deprecated and value is duplicated in the header.

Element: ExtendedInfos /ExtendedInfo (0,N)

	Type	Code	Pos	Description
UI		SUBDIVISION	N/A	Element Expected: Always if there are subdivisions
	Attribute	M/O	Value	Description
	Value	M	Numeric 0	Send the current (if LIVE) or the last finished subdivision (if not LIVE)
UI		ROTATION	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	Numeric 0	Send the current (if LIVE) or the last finished rotation (if not LIVE)
UI		LAST_QUAL	Numeric #0	Pos Description: Send the rank of the competitor Element Expected: If applicable in qualifying phases
	Attribute	M/O	Value	Description
	Value	M	S(20) without leading zeros	Send the ID of the competitor currently in the last qualifying place

Element: ExtendedInfos /SportDescription (0,1)

Sport Descriptions in Text.

Attribute	M/O	Value	Description
DisciplineName	M	S(40)	Discipline name (not code) from Common Codes
EventName	M	S(40)	Event name (not code) from Common Codes
SubEventName	O	S(40)	Phase level short name (not code) from Common Codes
Gender	M	CC @DisciplineGender	Gender code for the event unit

Element: ExtendedInfos /VenueDescription (0,1)

Venue Names in Text. DO NOT INCLUDE unless all at single venue and location.

Attribute	M/O	Value	Description
Venue	M	CC @VenueCode	Venue Code
VenueName	M	S(25)	Venue short name (not code) from Common Codes
Location	O	CC @Location	Location code
LocationName	O	S(30)	Location short name (not code) from Common Codes

Element: Result (1,N)

For any cumulative results message, there should be at least one competitor being awarded a cumulative result after one event unit or phase.

Attribute	M/O	Value	Description
Rank	O	S(2)	Rank of the competitor in the cumulative result. This attribute is optional because the competitor could get an invalid rank mark.
RankEqual	O	Y	Identifies if a rank has been equalled. Only send if applicable
ResultType	O	SC @ResultType	Type of the @Result attribute
Result	O	Numeric #0.000	Cumulative result Send just in the case @ResultType is POINTS
IRM	O	SC @IRM	The invalid result mark, in case it is assigned
QualificationMark	O	SC @QualificationMark	The code which gives an indication on the qualification of the competitor for the next round of the competition
SortOrder	M	Numeric	This attribute is a sequential number with the order of the results for the cumulative result, if they were to be presented. It is mostly based on the rank, but it should be used to sort out rank ties as well as results without rank.

Element: Result /Competitor (1,1)

Competitor related to one cumulative result.

Attribute	M/O	Value	Description
Code	M	S(20) with no leading zeroes	Competitor's ID
Type	M	T, A	T for team A for athlete
Bib	O	S(4)	Bib number
Organisation	M	CC @Organisation	Competitor's organisation

Element: Result /Competitor /Description (0,1)

Competitors extended information.

Attribute	M/O	Value	Description
TeamName	O	S(73)	Name of the team. Only applies for teams / groups.

Element: Result /Competitor /ExtendedResults /ExtendedResult (1,N)

Team competitor's extended results.

	Type	Code	Pos	Description
ER		CC @Apparatus	Numeric 0	Pos Description: Send apparatus number (as ordered) Element Expected: When available
	Attribute	M/O	Value	Description
	Value	O	Numeric #0.000	Send the competitor score on the apparatus
	ValueType	O	SC @ResultType	ValueType should be used to describe the type of data @Value
	IRM	O	SC @IRM	Send appropriate IRM code if IRM at this ExtendedResult
	Rank	O	Numeric #0	Send the rank of the competitor on the apparatus
	RankEqual	O	Y	Send Y where Rank at this specific ExtendResult is equalled else not sent.
	SortOrder	O	Numeric #0	Similar to rank but considering all competitors (those with IRM or no rank at this ExtendedResult)
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	DIFFICULTY
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the difficulty score for the competitor on the apparatus
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	EXECUTION
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the execution score for the competitor on the apparatus
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: Only in the case of inquiry for the difficulty score
	Attribute	Value	Description
	Code	INQUIRY
	Pos	N/A	N/A
	Value	SC @Inquiry	Send inquiry code
	Sub Element: Result /Competitor /ExtendedResults /ExtendedResult /Extension Expected: If applicable
	Attribute	Value	Description
	Code	PENALTY
	Pos	N/A	N/A
	Value	Numeric -0.000	Send any penalty the competitor received

Sample (Group)

...

</ExtendedResult>

</ExtendedResult>

</ExtendedResults>

</Athlete>

</Athlete>

...

</Composition>

</Competitor>

</Result>

...

Element: Result /Competitor /Composition /Athlete (1,N)

Attribute	M/O	Value	Description
Code	M	S(20) with no leading zeroes	Athlete's ID, corresponding to either a team member or a single athlete
Order	M	Numeric	Order attribute used to sort team members in a team (if Competitor @Type="T") or 1 if Competitor @Type="A".
Bib	O	S(4)	Bib number

Element: Result /Competitor /Composition /Athlete /Description (1,1)

Athletes extended information.

Attribute	M/O	Value	Description
GivenName	O	S(25)	Given name in WNPA format (mixed case)
FamilyName	M	S(25)	Family name in WNPA format (mixed case)
Gender	M	CC @PersonGender	Gender of the athlete
Organisation	M	CC @Organisation	Athletes' organisation
BirthDate	O	Date	Birth date (example: YYYY-MM-DD). Must include if the data is available
IFId	O	S(16)	FIG License Number

Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult (1,N)

Team member's or individual athlete's extended result, depending on whether Competitor @Type="T" or Competitor @Type="A".

	Type	Code	Pos	Description
ER		CC @Apparatus	Numeric 0	Pos Description: Send apparatus number (as ordered) Element Expected: When available
	Attribute	M/O	Value	Description
	Value	O	Numeric #0.000	Send the competitor score on the apparatus
	ValueType	O	SC @ResultType	ValueType should be used to describe the type of data @Value
	IRM	O	SC @IRM	Send appropriate IRM code if IRM at this ExtendedResult
	Rank	O	Numeric #0	Send the rank of the athlete on the apparatus
	RankEqual	O	Y	Send Y where Rank at this specific ExtendResult is equalled else not sent.
	SortOrder	O	Numeric #0	Similar to rank but considering all competitors (those with IRM or no rank at this ExtendedResult)
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	DIFFICULTY
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the difficulty score for the competitor on the apparatus
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: When available
	Attribute	Value	Description
	Code	EXECUTION
	Pos	N/A	N/A
	Value	Numeric #0.000	Send the execution score for the competitor on the apparatus
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: Only in the case of inquiry for the difficulty score
	Attribute	Value	Description
	Code	INQUIRY
	Pos	N/A	N/A
	Value	SC @Inquiry	Send inquiry code
	Sub Element: Result /Competitor /Composition /Athlete /ExtendedResults /ExtendedResult /Extension Expected: If applicable
	Attribute	Value	Description
	Code	PENALTY
	Pos	N/A	N/A
	Value	Numeric -0.000	Send any penalty the competitor received

Sample (Individual)

...

</ExtendedResult>

</ExtendedResult>

</ExtendedResults>

</Athlete>

</Composition>

</Competitor>

</Result>

...

2.2.4.6 Message Sort

Sort by Result @SortOrder.

Ranked competitors at the top followed by unranked (IRM) competitors.

2.2.5 Event Final Ranking

2.2.5.1 Description

The event final ranking is a message containing the final results and ranking at the completion of one particular event.

The final ranking message is a generic message for all sports, including the full event final result for all competitors who were either ranked, got an Invalid Rank Mark (disqualified, etc.), or both.

2.2.5.2 Header Values

The following table describes the message header attributes.

Attribute	Value	Comment
CompetitionCode	CC @Competition	Unique ID for competition
DocumentCode	DDGEEE000	DD according to CC @Discipline G according to CC @DisciplineGender EEE according to CC @Event
DocumentType	DT_RANKING	Event Final ranking message
Version	1..V	Version number associated to the message's content. Ascendant number
ResultStatus	SC @ResultStatus	Result status, indicates whether the data is official or partial. OFFICIAL PARTIAL
FeedFlag	"P"-Production "T"-Test	Test message or production message.
Date	Date	Date when the message is generated, expressed in the local time zone where the message was produced.
Time	Time	Time up to milliseconds when the message is generated, expressed in the local time zone where the message was produced.
LogicalDate	Date	Logical Date of events. This is the same as the physical day except when the unit or message transmission extends after midnight. If an event unit continues after midnight (24:00), all messages produced will be considered as happening at the logical date on which the event unit began (e.g. for a session which began at 21:00 on Aug 2 and ended at 1:20 on Aug 3, the message will all be dated Aug 2). The end of the logical day is defined by default at 03:00 a.m. For messages corrections, like invalidating medals or Records, it will be the LogicalDate of the day of the correction. Logical Date is expressed in the local time zone where the message was produced.
Source	SC @Source	Code indicating the system which generated the message.
Serial	Numeric	Sequence number (positive integer) for ODF messages. Serial starts with 1 each day for each Source.

2.2.5.3 Trigger and Frequency

This message is only triggered after a unit which affects the final ranking is official and that particular ranking is not subject to change.

Trigger also after any major change.

2.2.5.4 Message Structure

The following table defines the structure of the message.

Level 1	Level 2	Level 3	Level 4	Level 5	Level 6	Level 7
Competition (1,1)
	Code
	ExtendedInfos (0,1)
		SportDescription (0,1)
			DisciplineName
			EventName
			Gender
		VenueDescription (0,1)
			Venue
			VenueName
	Result (1,N)
		Rank
		RankEqual
		ResultType
		Result
		IRM
		SortOrder
		Competitor (1,1)
			Code
			Type
			Organisation
			Description (0,1)
				TeamName
			Composition (1,1)
				Athlete (1,N)
					Code
					Order
					Description (1,1)
						GivenName
						FamilyName
						Gender
						Organisation
						BirthDate
						IFId

2.2.5.5 Message Values

Element: Competition (1,1)

Attribute	M/O	Value	Description
Code	M	CC @Competition	Unique ID for competition

Element: ExtendedInfos /SportDescription (0,1)

Sport Description in text

Attribute	M/O	Value	Description
DisciplineName	M	S(40)	Discipline name (not code) from Common Codes
EventName	M	S(40)	Event name (not code) from Common Codes. Must be included if it is a single event
Gender	M	CC @DisciplineGender	Gender code for the event unit. Must be included if it is a single gender

Element: ExtendedInfos /VenueDescription (0,1)

Venue Names in text

Attribute	M/O	Value	Description
Venue	M	CC @VenueCode	Venue code
VenueName	M	S(25)	Venue short name (not code) from Common Codes

Element: Result (1,N)

For any event final ranking message, there should be at least one competitor being awarded a result for the event.

Attribute	M/O	Value	Description
Rank	O	Numeric	Rank of the competitor in the corresponding event. This attribute is optional because the competitor could get an invalid rank mark.
RankEqual	O	Y	Identifies if a rank has been equalled. Only send if applicable
ResultType	O	SC @ResultType	Type of the @Result attribute
Result	O	Numeric ##0.000	Score. Only include the result if the competitor was in the final.
IRM	O	SC @IRM	IRM for the particular event Send just in the case @ResultType is IRM
SortOrder	M	Numeric	Unique sort order for all results based on rank to break rank ties.

Element: Result /Competitor (1,1)

Competitor related to one final event result.

Attribute	M/O	Value	Description
Code	M	S(20) with no leading zeroes	Competitor's ID
Type	M	T, A	T for team A for athlete
Organisation	O	CC @Organisation	Competitors's organisation if known

Element: Result /Competitor /Description (0,1)

Attribute	M/O	Value	Description
TeamName	M	S(73)	Name of the team. Only applies for teams / groups.

Element: Result /Competitor /Composition /Athlete (1,N)

Attribute

M/O

Value

Description

Code

S(20) with no leading zeroes

Athlete's ID, corresponding to an individual athlete or a team member.

Team members should be participating in the event.

Order

Numeric

Order attribute used to sort team members in a team (if Competitor @Type="T") or 1 if Competitor @Type="A".

Element: Result /Competitor /Composition /Athlete /Description (1,1)

Attribute	M/O	Value	Description
GivenName	O	S(25)	Given name in WNPA format (mixed case)
FamilyName	M	S(25)	Family name in WNPA format (mixed case)
Gender	M	CC @PersonGender	Gender of the athlete
Organisation	M	CC @Organisation	Athletes' organisation
BirthDate	O	Date	Birth date (example: YYYY-MM-DD). Must include if the data is available
IFId	O	S(16)	FIG License Number

Sample (Individual)

...

</Athlete>

</Composition>

</Competitor>

</Result>

...

2.2.5.6 Message Sort

Sort by Result @SortOrder

2.2.6 Configuration

2.2.6.1 Description

The Configuration is a message containing general configuration.

Ideally the configuration should be provided before competition. However it may be possible that the configuration for one particular event, phase or event unit is not known in advance. In that case send the unknown attributes blank (Value='').

2.2.6.2 Header Values

The following table describes the message header attributes.

Attribute	Value	Comment
CompetitionCode	CC @Competition	Unique ID for competition
DocumentCode	DDGEEE000	DD according to CC @Discipline G according to CC @DisciplineGender EEE according to CC @Event
DocumentType	DT_CONFIG	Configuration message
Version	1..V	Version number associated to the message's content. Ascendant number
FeedFlag	"P"-Production "T"-Test	Test message or production message.
Date	Date	Date when the message is generated, expressed in the local time zone where the message was produced.
Time	Time	Time up to milliseconds when the message is generated, expressed in the local time zone where the message was produced.
LogicalDate	Date	Logical Date of events. This is the same as the physical day except when the unit or message transmission extends after midnight. If an event unit continues after midnight (24:00), all messages produced will be considered as happening at the logical date on which the event unit began (e.g. for a session which began at 21:00 on Aug 2 and ended at 1:20 on Aug 3, the message will all be dated Aug 2). The end of the logical day is defined by default at 03:00 a.m. For messages corrections, like invalidating medals or Records, it will be the LogicalDate of the day of the correction. Logical Date is expressed in the local time zone where the message was produced.
Source	SC @Source	Code indicating the system which generated the message.
Serial	Numeric	Sequence number (positive integer) for ODF messages. Serial starts with 1 each day for each Source.

2.2.6.3 Trigger and Frequency

The message is sent prior to any ODF Sports message.

Trigger also after any major change, but considering that, if possible, the configuration for one particular event, phase or event unit must be provided before the start list.

2.2.6.4 Message Structure

The following table defines the structure of the message.

Level 1	Level 2	Level 3	Level 4	Level 5
Competition (1,1)
	Code
	Configs (1,1)
		Config (1,N)
			Gender
			Event
			Phase
			ExtendedConfig (1,N)
				Type
				Code
				Pos
				Value

2.2.6.5 Message Values

Element: Competition (1,1)

Attribute	M/O	Value	Description
Code	M	CC @Competition	Unique ID for competition

Element: Configs /Config (1,N)

Attribute	M/O	Value	Description
Gender	M	CC @DisciplineGender	Gender code of the RSC.
Event	M	CC @Event	Event code of the RSC.
Phase	O	CC @Phase	Phase code of the RSC.

Element: Configs /Config /ExtendedConfig (1,N)

	Type	Code	Pos	Description
EC		SUBDIV_NUM (by phase)	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	Numeric #0	Total number of subdivisions in the phase
EC		COMPETITOR_SET_NUM	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	Numeric #0	Number of different subdivision compositions in the phase
EC		APP_NUM (by phase)	Numeric #0	Pos Description: Send the subdivision number, one for each subdivision Element Expected: Always
	Attribute	M/O	Value	Description
	Value	O	Numeric #0	Number of apparatuses in the @Pos subdivision in this phase
EC		QUAL_RANK (by phase)	Numeric 0	Pos Description: 1 to indicate first rank 2 to indicate last rank Element Expected: Only in phases where qualification applies
	Attribute	M/O	Value	Description
	Value	M	Numeric #0	Indicates qualification for the next round, based on rank. Send the qualifying rank according to Qualification rule and @Pos (e.g.: In qualification if the rule is "Top 24 qualify for the Final", send 1 - for first rank (Pos=1) 10 - for last rank (Pos=2)
EC		QUAL_RESERVES	N/A	Element Expected: Only in phases where qualification applies
	Attribute	M/O	Value	Description
	Value	M	Numeric #0	Number of qualification reserves
EC		QUAL_RULE	N/A	Element Expected: Only in phases where qualification applies
	Attribute	M/O	Value	Description
	Value	M	S(n)	Information about qualification Send the text with the qualification rule
EC		INTEGRATED	N/A	Element Expected: Always
	Attribute	M/O	Value	Description
	Value	M	S(1)	Send Y if this phase is integrated with other events at the same time. If this phase is stand-alone send N.

Sample (Individual)

...

</Config>

</Config>

</Configs>

...

2.2.6.6 Message Sort

There is no general message sorting rule.